LG LTC22350ST Owner's Manual page 13

REVERSE AND REATTACH REFRIGERATOR
Using a 1/&-inchsocket wrench, loosen and remove
Hinge Pin from the Middle Hinge Pin Bracket
Remove washer underneath the middle hinge and
set aside
NOTE: At this point the d_r will be loose, lift up
door slightly and remove it, (Fig, 20 and 20a),
* REMOVE base grill,
See BASE GRILL INSTRUCTIONS.
* Remove the washer from the Bottom Hinge Pin (Fig.22),
• Using a 1/4-inchsocket wrench, loosen and remove
the Hinge Pin from the Bottom Hinge. Reattach
the Hinge Pin to the opposite side of the Hinge
(see Fig. 22 and 22a),
NOTE: This is easier to do while the Hinge is still
attached,.
Fig 20a
L_sen and remove the 2 bolts and the
phillips head screw to remove the Middle
Hinge Bracket from refrigerator housing
(Fig. 21), Set parts aside.
* Using 10 mm or 13/32-inch socket wrench
with 2-inch extension, loosen the 3 bolts
and remove the Bottom Hinge from right
side of housing (Fig. 23),
13