II Measuringa Valuefor WhiteBalance
1
Light a reference object.
Place a neutral gray or white object under the lighting
that will
be used in the final photograph.
In studio settings, a standard
gray panel can be used as a reference object.
Note that
exposure is automatically
increased by 1 EV when measuring
white balance; in exposure mode rl, adjust exposure so that
the electronic
analog exposure displays shows _+0(pg. 123).
2
Set white
balance
to PRE (Preset
manual).
Press the WB button and rotate the main command
dial until
PRE is displayed
in the control panel.
d-O
WBbutton
Main command
dial
o
Q
Control panel
150