Nikon D700 User Manual page 57

II Canceling Bracketing
To cancel bracketing, press the Fn button and rotate the main
command dial until the number of shots in the bracketing
sequence is zero (_F) and _ is no longer displayed in the control
panel. The program last in effect will be restored the next time
bracketing is activated. Bracketing can also be cancelled by
performing a two-button reset (pg. 196), although in this case the
bracketing program will not be restored the next time bracketing
is activated.
[] White Balance Bracketing
White balance bracketing is not available at an image quality of NEF
(RAW). Selecting NEF (RAW), NEF (RAW)+JPEG fine, NEF (RAW)+JPEG
normal, or NEF (RAW)+JPEG basic cancels white balance bracketing.
White balance bracketing affects only color temperature (the amber-blue
axis in the white balance fine-tuning display, pg. 143). No adjustments are
made on the green-magenta axis.
In self-timer mode (pg. 102), the number of copies specified in the white-
balance program will be created each time the shutter is released.
If the camera is turned off while the memory card access lamp is lit, the
camera will power off only after all photographs in the sequence have
been recorded.
138