Replacing The Tv Tuner Card - Dell XPS One 24 Service Manual

1 WLAN card
3 screws (2)
NOTICE:
force may damage the connectors.
NOTICE:
under the card. Also, ensure to remove the antenna cables from under the card.
6 To install a new WLAN card, align the notch on the card with the tab in
the connector slot.
7 Insert the WLAN card at a 45-degree angle into the system board
connector.
8 Replace the two screws that secure the WLAN card.
9 Connect the appropriate antenna cables to the WLAN card you are
installing. The WLAN card has three triangles on the label (black, gray,
and white):
• Connect the black cable to the connector marked with a black
triangle.
• Connect the gray cable to the connector marked with a gray triangle.
• Connect the white cable to the connector marked with a white
triangle.
10 Replace the top shield (see "Replacing the Top Shield" on page 15).
11 Replace the computer cover (see "Replacing the Computer Cover" on
page 11).

Replacing the TV Tuner Card

1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the computer cover (see "Replacing the Computer Cover" on
page 11).
3 Remove the stand (see "Replacing the Stand" on page 13).
26
Replacing Cards
The connectors are keyed to ensure correct insertion. Use of excessive
To avoid damage to the WLAN card, ensure that there are no cables
2 antenna cables (3)