Dell XPS One 24 Service Manual page 46

USB
Configuration
Power
Power
Management
Setup
ACPI Suspend
Type
Remote Wake Up Allows you to set the network interface controller to on or off.
Auto Power On
AC Recovery
Device Detect
Error
Boot
Boot Device
Priority
Hard Disk Boot
Priority
CD/DVD Boot
Priority
46
System Setup
Allows you to enable or disable the USB controller.
Specifies the ACPI suspend type. The default is S3.
This option allows the computer to turn on when a network
interface controller receives a wake up signal. The factory
default setting is Off.
Allows you to enable or disable an alarm to turn on the
computer automatically.
Specifies the behavior of the system after recovering from a
power loss.
• Power on — The computer turns on after it recovers from a
power failure.
• Power off — The computer remains turned off.
• Last state — The computer returns the power state it was in
before the power failure.
Allows you to enable or disable the device error report.
Sets the boot priority among the available devices.
Sets the hard drive boot priority. The items displayed are
dynamically updated according to the hard drives detected.
Sets the optical drive boot priority. The items displayed are
dynamically updated according to the optical drives detected.