Dell Studio Slim Service Manual page 26

1 cutouts (2)
3 notch
NOTICE: To avoid damage to the memory module, press the memory module straight down into the connector while you apply equal force to each end
of the memory module.
8. Insert the memory module into the connector until the memory module snaps into position.
If you insert the memory module correctly, the securing clips snap into the cutouts at each end of the memory module.
9. Replace the computer cover (see
10. Connect your computer and devices to electrical outlets, and then turn them on.
11. If a message appears stating that the memory size has changed, press <F1> to continue.
12. Log on to your computer.
13. Right-click the My Computer icon on your Microsoft
14. Click the General tab.
15. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Back to Contents Page
2 memory module
4 tab
Replacing the Computer Cover).
® ®
Windows desktop and click Properties.