Dell Studio Slim Service Manual page 19

14. Align the two screw holes on the FlexDock with the FlexDock drive cage.
15. Replace the two screws to secure the FlexDock in the FlexDock drive cage.
16. Slide the FlexDock drive cage along with the FlexDock in the FlexDock slot till it snaps in place.
NOTE: Ensure that the FlexDock is installed before the FlexDock cable is connected.
17. Connect the FlexDock USB cable to the back of the FlexDock and to the internal USB connector (F_USB1) on the system board (see
Components).
18. Replace the optical drive (see
19. Replace the front panel (see
20. Replace the computer cover (see
21. Connect your computer and devices to electrical outlets, and then turn them on.
Removing the FlexBay/FlexDock Break-Away Metal Plate
Align the tip of a Phillips screwdriver with the slot on the break-away metal plate and rotate the screwdriver outwards to break and remove the metal plate.
Replacing the FlexBay/FlexDock Drive Insert
1 front panel 2 FlexBay drive insert lever
1. Remove the front panel (see
Replacing the Optical Drive).
Replacing the Front Panel).
Replacing the Computer Cover).
3 FlexBay drive insert
Replacing the Front Panel).
System Board