System Time - Dell OptiPlex GX300 User Manual

provides the microprocessor serial number(s). The default is Disabled.

System Time

System Time resets the time on the computer's internal clock.
Time is kept in a 24-hour format (hours:minutes:seconds). To change the time, press the left- or right-arrow key to select a field, and then press
plus (+) or minus (–) to increase or decrease the number. If you prefer, you can type numbers in each of the fields.
ZIP Floppy Support
ZIP Floppy Support enables or disables the support of Advanced Technology Attachment Packet Interface (ATAPI) ZIP devices by the system
BIOS. When Enabled is selected, ATAPI ZIP devices are supported as diskette drives, and the first ZIP device is listed as a bootable device
under Boot Sequence. When Disabled is selected, the system BIOS ignores ATAPI ZIP devices, though the operating system may still support
them.
Back to Contents Page