Replacing The Front I/O Panel - Dell Inspiron 620s Service Manual

Replacing the Front I/O Panel
CAUTION: To avoid damage to the cable connectors and the cable routing clips, carefully slide the front I/O panel into the front I/O panel clamp
slot.
1. Follow the instructions in Before You
2. Align and slide the front I/O panel clamps into the front I/O panel clamp slots.
3. Replace the screw that secures the front I/O panel to the front panel.
4. Connect the front I/O panel cables to the system board connectors, AUDIOF1, USBF1, and USBF2 (see
5. Replace the front bezel (see
6. Replace the computer cover (see
7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Replacing the Front Bezel).
Replacing the Computer Cover).
System Board Components).