Table of Contents
Advertisement
Choose Password Protected from the pop-up menu at the upper left of the dialog box.
2
Type and reenter the password, and click OK. You can use uppercase and lowercase letters, numerals, or punctu
3
ation marks.
The options become unavailable.
Unlock or unprotect a profile
In the Preflight Edit Profile dialog box, select a profile.
1
2
Choose Unlocked from the pop-up menu at the upper left of the dialog box.
If prompted, enter the correct password, and click OK.
3
Change profile settings
You can change the settings of a single profile.
See also
"Preflight Edit Profile dialog box overview" on page 499
"Lock, unlock, and password-protect profiles" on page 501
"Add and remove profiles" on page 500
Change general profile settings
Open the Preflight Edit Profile dialog box.
1
2
Expand the profile group and select a profile.
If the profile is locked, choose Unlocked from the pop-up menu.
3
Change any of the following settings:
4
• Enter a new name for the profile, and describe it in the Purpose box.
• To apply password protection to the profile, select Password Protected from the pop-up menu. When prompted,
type and reenter the password, and click OK. Otherwise, choose Unlocked.
• Enter your name and email address.
• Assign the profile to a group. Select an existing group from the menu, or select New Group, type a name, and click
OK. Groups are sorted alphabetically.
5
When you finish editing a password-protected profile, select Locked from the pop-up menu. You may also want
to password-protect it again.
Click OK, or click Save to save your changes without closing the dialog box.
6
Modify existing check and alert settings
Open the Preflight Edit Profile dialog box.
1
2
Expand the profile group and select a profile.
If the profile is locked, choose Unlocked from the pop-up menu.
3
Expand the profile to view the groups of properties available for the profile.
4
Select a property group.
5
ADOBE ACROBAT 3D VERSION 8
User Guide
502
Advertisement
Table of Contents
