Mitsubishi CS-31305 Owner's Manual page 65

Using the Super Quick View tuning
Super-Quick-View allows you to cycle through a list of up to ten
channels with tile SQV button. You use the menus to add channels
to the list or to remove channels from the list. You can also add
channels to the list using only the remote conl_rol.
,_ Advanced Features
Set the timer
Use parental lock
P" Use Super Quick View
Use Advanced PIP
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
"IV Main Menu.
Use Super Quick View
__.
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
Advanced Features Menu.
TUse Super Quick View
• Channel 003
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
Advanced Features Menu.
----4
customizing the Super Quick
View list with the menus
0 Press the MENU button oi1 the
remote control. The TV Main
Menu _ill appear on the screen.
O Select "Advanced Features"
using the ADJUST buttons;
press ENTER.
O Select "U,_e Super Quick View"
using the ADJUST buttons;
then, pre,_s the ENTER button.
Use the/_JgJUST buttons to
select a position in the list:;
press ENTER.
Use the ADJUST buttons,.
CHANNEL buttons or number
buttons t_ add a channel to the
list; pres,_ ENTER. You can
clear a channel by pressing the
CANCEl, button. Repeat these
steps to add channels to tlhe
Super Quick View memory.
Press the MENU button to exit
this menu.
adding channels to the list with the remote control
_]} Use the channel controls to tune the TV to the channel you
want to add to the list.
O
Press and hold the SQV button for about 2 seconds. V_hen you
release the button, the letters "SQV" will appear under the
channel number, indicating that the channel has been pro-
grammed into Super Quick View me_ory.
Using the Advanced Features 65