Table of Contents
Advertisement
TV
+ VCR
+ cable
with
a decoder
box
(cont.)
L>Important:
_>Important:
_>Important:
procedure
O
Connect
the incoming
cable 1:othe IN terminal
on the two-way
splitter.
O
Connect
a coaxial cable to one of the OUT terminals
on the two-
way splitter.
Connect
the other end of this (:able to the antenna
terminal
on the back of the TV.
Connect
a second coaxial cable to the other OUT terminal
on
the two-way
splitter.
Connect
the other end of this cable to the
IN terminal
on the decoder
box.
Connect
a third coaxial cable to the OUT terminal
on the back
of the decoder
box; connect
the other
end of this cable to the
ANTENNA-IN
terminal
on the back of the VCR.
Connect
an RCA pin video cable to the VIDEO OUT terrainal
on the back of the VCR. Connect
the other end of this cable to
the VIDEO
INPUT
terminal
on the back of the TV.
If you are connecting
a Super VttS (S-VHS) VCR, use an S-Video
cable instead
of an RCA pin-type
video cable. Connect
this S-Video
cable to the S-VIDEO
OUT terminal
on the VCR. Connect
the other
end of this cable to the S-VIDEO
INPUT
terminal
on the back of
the TV.
O
Connect
a set of RCA pin-type
audio cables to the AUDIO OUT
terminals
on the back of the VCR Use the red cable to connect
the right (R) channel
and the white cable for connecting
the left
(L) channel.
Connect
the other ends of these cables to the AUDIO INPUT
terminals
on the back of the TV.
If your VCR is monaural
(non-stereo),
you only need to connect a
single RCA pin-type
audio cable. Connect
the cable to the VCR,
then connect
the other end to the L (I_,EFT) audio input on the back
of the TV.
If your VCR has a video channel
switch,
set il; to "OFF/AV." See
your VCR's owner's guide for details.
Start
playing
a tape on your VCR
Use the INPUT
button
on your TV's remote
control to select
Input-1.
32
Chapter
2: Connecting
Your TV
Hide quick links:
Advertisement
Table of Contents
