Antennas - Mitsubishi CS-31305 Owner's Manual

TV + separate UHF and VHF antennas
equipment you will need
If UHF and VItF signals are brought into your home with two
separate antennas, you'll need to combine the antennas in order to
connect them to the TV. To do this you wi]l need a UHF/VHF
combiner. (There are different combiners tbr different kinds of
leads. Check with your local electronics store for the kind of com-
biner you need.)
Pictured to the right is a
standard combiner.
To connect separate UHF and VHF antennas to your TV:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
Press the combiner onto the antenna terminal on the rear of
the TV.
\\ \\_
\\ \\\l
VHF Antenna UHF Antenna
(Channels 2-13) (Channels 14-69)
nil/ ....
y//
i
--1--- Flat Twin Lead
External
Antenna
or Cable
300 Ohm to
75 Ohm
_) Combiner
Back Side
Flat Twin Lead--
]V Rear Terminals
Basic Connections 27