Mitsubishi CS-31305 Owner's Manual page 34

TV + audio system
equipment you will need
To hook up an audio system, you will need:
• One set of RCA pin audio cables.
procedure
0
Connect the audio cables to the
AUDIO OUTPUT terminals on
the back of the TV. Use the red
cable to connect the right (R)
channel and the white cable to
connect the left (L) channel.
O Connect the other ends of these cables to the AI_D[ IN terminals
on the back of the audio system.
O
Turn off the television's speakers. To do this, press the AUDIO
function button on the remote conr_rol until you see the
"Speaker" display. Set the speakers to "External" by pressing
the adjust (up/down) buttons. See "Adjusting the sound," on
page 54.
Set the audio system's input to the "AUX" position.
_- While Lead
--- Red Lead 0
Audio System Rear Terminals
I AUX
TV Rear Terminals
--- White Lead
Red Lead
VHF/LIHF
(75_2}
34 Chapter 2: Connecting Your TV