Adjusting Controls; Additional Control Center Features; Humidity Control; Temp Alarm - Maytag MFI2269VEQ3 User Instructions

Table of Contents

Advertisement

Available languages

Available languages

The recommended
settings should be correct for normal
household refrigerator use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream
is firm.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
Adjusting Controls
The REFRIGERATOR control adjusts the refrigerator
compartment
temperature.
The FREEZER control adjusts the
freezer compartment
temperature.
If you need to adjust the temperature in either the refrigerator or
freezer compartment,
use the settings listed in the chart as a
guide.
To Adjust Set Point Temperatures:
The first touch of the up or down arrow touch pad displays the
current temperature
set point.
Press the up or down arrow touch pads until the desired
temperature set point is displayed.
NOTE: Except when first turning on the refrigerator, do not
adjust either temperature control more than one setting at a
time. Wait 24 hours between adjustments for the temperature
to stabilize.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
REFRIGERATOR
Control 1° lower
FREEZER too warm/too
little ice
FREEZER Control 1°
lower
REFRIGERATOR too cold
REFRIGERATOR
Control 1° higher
FREEZER too cold
FREEZER Control 1°
higher
Cooling On/Off
IMPORTANT:
Depending on your model you may have a control center with
an On/Off button (Style 1), or you may have a control center
without an On/Off button (Style 2).
The On/Off control turns off cooling for both compartments
and turns off the dispenser. It does not disconnect
power to
the refrigerator.
Style 1 - Press and hold the On/Off button for three seconds.
The red LED will light up to indicate that cooling is Off. Press the
On/Off button again to turn on the cooling. The LED will turn off.
refr zerator
coo[inZ off
how 3 sec
Style 2 - Press the Freezer up arrow touch pad until OFF appears
in the display. Neither compartment
will cool. Press the Freezer or
Refrigerator down arrow touch pad to turn the cooling back on.
Additional
Control Center Features
Fast Cool
The Fast Cool feature assists with periods of high refrigerator
use, full grocery loads, or temporarily warm room temperatures.
Press the Fast Cool touch pad to set the freezer and
refrigerator to the lowest temperature settings. Press the Fast
Cool touch pad again to return to the normal refrigerator set
point.
NOTE: The Fast Cool feature will automatically
shut off in
approximately
2 hours. When fast cool is on, the temperature
cannot be adjusted.
@
fast
coo_
Humidity Control (on some models)
The Humidity Control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments
or
when you notice moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.
Press Humidity Control to turn on the door heater. Press
Humidity Control again to turn off the heater. The LED will be
illuminated when Humidity Control is on.
control
Temp Alarm
The Temp Alarm feature provides temperature information
in the
event of a power outage.
Power outage: During a power outage, if the temperatures
in the
refrigerator and freezer compartments
exceed normal operating
temperatures,
the highest temperature reached will be displayed.
Press the Temp Alarm touch pad until the indicator light is lit,
to turn on this feature. Press and hold Temp Alarm for
3 seconds until the indicator light goes off to turn off this
feature.
Temperature
alarm: An alarm will sound repeatedly if the freezer
or refrigerator compartment
temperatures
exceed normal
operating temperatures
for an hour or more.
The temperature
displays will alternately show the current
temperatures
and the highest temperatures
the compartments
reached.
Press the Temp Alarm touch pad once to stop the audible
alarm and alternating temperature
displays. The Temp Alarm
light will continue to flash until the refrigerator returns to the
set temperature.
W
alarm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents