Philips 51PW9363 Directions For Use Manual page 9

r_ TV;_,oudioivideo (A_ input.jac_' provide
1 f!_r direct picw.re and sound connections
between the TV and ance_sory devices such a,_
VCRs, D _D players, and others that have A V out-
put.jacks.
This'example, which _e_ the INPUT-AV I.jacks,
shom_ you one way you can connect a VCR to
__ar Tg
Refer to the directions-for-u*e manual tbr >vmr
VCRforfp,a'tber information on connectio_.
To make the connections shown in this"example,
3_u will need:
• one coaxial cable (75_2)
• onecabletbravideoconnection(standard
RCA -t3pephonoplug)
• t_cabl_Ltbroudioconnectio_(standard
RCA-type phono plugs) (only one cable is"
needed for a nonst_o VCR).
NOTE: The cable._" a re not s_plied with your 7_;
You should be able to buy them at most stores
that sell electnmics. Or you can call imr
C_tomer Care
Center at 1-800-531-0039
1
2
3
4
Connect a cable TV or antenna signal
to the ANT IN jack on the back af the
VCR.
Connect from the OUT jack on the
back af the VCR to the ANTENTNAIN
7.r_ jack on the back af the T_:
Connect the VIDEO OUT jack an the
back of the VCR to the INPUT-AV 2
_qDEO jack on the back of the TV.
Cannecl the audio output R(ight) and
L(efl) jacks on the back of the VCR to
the INP[Tr-AV 2 AUDIO jacks on Ihe
back of the T_:
NOTE: If the VCR is a mona (nons*emo)
refit, co_t only the left _o cable,
w[fich _naally has a white-coded plug,
Press the AV button on the remote can- trol as many times as neecssa_ to select
the AV2 source for viewing of materials
from the VCR.
Back oqVCR
(example only)
[]
®
ConnectlngAccessory Devlces toYourTV
BackofTV
Stereo sound will pass from the ANT
OUT jack on the VCR to file ANTENNA
IN 75_ jack on the TV only when the
VCR is in TV mode. This is the mode
that _lows the TV to use its channel
selector.
To simpli_ making connections, audio
arid vkleocables often have color-coded
plugs. The jacks on your TV are likewise
color coded to match the plugs. The cod-
ing is as follows:
--Yellow for video (composite)
--Red for the right audio channel
--White for the let1 at_lio channel
NOTE: Zfyour VCR is mona (non-
stereo), you will connect only one audio
cable. You must ensure that the TV is set
to MONa for tile signml source to which
you've connected the VCR (1NPUT-AV 2,
1NPUT-AV 1, or the side panel inputs
[AV3]). Othenadse, you will receive
sound from only one of the TV's speakers.
See page 36.
You caa display the AV], AV2, or AV3 signal
sources in the PIP window. See page 7 of the
Quick Use and Setup Guide tbr i_ormation on
nsiag the l?icture-ia-Pictore (PIP) fbature.