Philips 51PW9363 Directions For Use Manual page 10

Connocting Accessory Devices to Ynur "l"V
presented here is a connection example
involving a VCR and cable box.
Refer to the YCR i' direetionszfor-use manual
far further infoFmation on
£;onnect_otK_'.
To make the connections in this _ample, yon
will need:
• one, two-w@' signal splitter
• two coaxial cables (75£1)
• one eable./br a v'ideo connection (standard
RCA-type p!_mo plug)
• two eable,_'f!_r audio connections (standard
RCA-t)7)e p!_mo plugs) (only one cable is
needed fiw connection to a nonstereo
VCR).
NOTE; The cables' are not svpplied with yovr
77,'.You s!_uld be able to buy them at mast
stores that sell electronics. Or you can call
out" Customer Care Center at
1-800-531-0039.
1
2
3
4
5
6
Connect a cable TV signal to a two-
way signal splitter.
Connect one of the two-way signal
splitter outputs to the CABLE IN
jack on the cable box.
Connect the other tw'o-way signal
splitter output to the ANTENNA IN
75K2on the back of the TV,
Connect from the cable box TO TV
jack to the ANT IN jack on the back
of the VCR.
Connect the VIDEO OUT jack on
the VCR to the INPUT-AV 2 _ql)EO
jack on the back of the T_;
Connect the AUDIO OUT R(ight)
and L(ef0 jacks on the VCR to
INPUT-AV 2 AUDIO jacks an the
back of the TV.
"It_eRF outputon a cable box, usually
labeled OLrI'PUT, OLTF, or qY3 T'v,
will not p_s a stereo sound si_ to the
ANTENNA ]N 750. jack on the T'v. _t;hov_'-
ever, your cable box has separate
Audio/Video outputs, t_ing A/V cables to
connect to tho_e untpu_sand to ",he,_,¢
inpu_;son the TV might p_s a _ereo sound
signal to the T'v. C_nract your cable 'YV
company for more ir_¢bmiadon.
7
NOTE: If the VCR is a nollstereo unit,
colmect only the le_ at_lio cable,
whJc_l usu_ly has a white-coded plug.
Press the AV button on the remote
control as many times as necessary
to select the AV2 source _or viewing
of materials from the cable box or
VCR.
®
@QQ
To simplifiimakin_ connections, the plub_
on atldio and video c_bles ate often color
coded. "Ittejaclc_ artyour TV are likewise
cdor code6 va match the pk_gs.
The coding is as follows:
--¥dlow for video (cornpo_te)
--Red for the right;audio channel
--Wbiie for the left at_diocbarmel
NOTE: T:t'yourVCR is mona (nortstere6),
you will connect ordy one ea_diocable. You
must e_t_tre that the TV is set to MONO for
the sibmalscarce to which you've cormected
the VCR (_PLIT-AV 2, RqPUT-AV 1, orthe
side panel inputs _AV3]).Otherwise_you will
receive sound from only one of the TV's
speakers. See page 36.
10