Philips 51PW9363 Directions For Use Manual page 80

Convergence is the correct lining up of'the red and blue light paths
n the TVscreen. if'the paths don t line up, colorj?inges will appear
around objects on screen. El'no eolar fh'nges show, then no convergence
adjustments are neeessar_ NOTE: Allow the TV to warm up 20 minutes
before adjusting convergence. See the chart to the right.fbr guidance as
to which convergence controls to use.
Press the MENU/SELECT button. The menu appea_. Press
the CURSOR RING RIGHT to enter the PICTURE submena.
Then press the CURSOR RING DOWN until MANUAL
CONVERGE is highlighted.
PE'eSS the CURSOR RING RIGHT to enter the MANUAL
CONVERGE submenu. If you want to adjust the Red
Convergence, press the CURSOR RING RIGHT to enter the
adjust mode, If you want to adjust the Blue Convergence,
press the CURSOR RING DOWN to highlight CONVERGE
BLUE, then press the CURSOR RING RIGHT to enter adjust
mode.
In adjust mode, pE'eSS t he CURSOR RING RIGHT, LEFT,
UP, or DOWN to adjust the cross hair until the color out-
line around it is gone. (The adjustmentis automatically saved
in the TV's memory.) To return to the MANUAL CON-
VERGE menu, press the MENU/SELECT button, To exit the
on-screen display, press the STATUS/EXIT button.
Screen
appearance Action
Adjust the
CONVERGE
Various RED control.
Images Then if any red
throughout outlines remain,
the entire adjust the
_icture have MULTIPOINT
red outlines. RED control.
Adiust the
CONVERGE
Various BLUE control.
Images Then if any blue
throughout outlines remain,
the entire adjust the
_icture have MULTIPOINT
blue outlines. BLUE control.
Th.e
Multipoint Red/Blue Cbnvergence controls enable you to adjust
_L the convergence at speeif!epoints on the TVscreen.
NOTE: The on-screen display will leave the screen qfier 20 secondY o['
inactiviOz If this happens, simply press the MENU/SELECT button to
bring the MANUAL CONVERGE submenu back.
HANUAL CO°VERGE , 7; PICTURE
_ n I HARUAL CONVERGE _,
CONVERGE BLUE
:
• CONVERGE RED
• .OLT,BO,UV REO • BE UE
• HULTiPOIUTBLUE
lill lillll
• SAVE HULTIPOIUT • MUnlPOINI BLUE
I t • SAVE MRLTIPOIRV
t l
+++++++
+++++++
÷++_+++
+++++++
2
Press the MENU/SELECT button. The menu appears.
Press the CURSOR RING RIGHT to enter the PICTURE
menu. Then press the CURSOR RING DOWN until MAN-
UAL CONVERGE is highlighted.
Press the CURSOR RING RIGHT to enter the MANU-
AL CONVERGE submenu. Press the CURSOR RING
DOWN until MULTIPOINT RED or MULTIPOINT BLUE
is highlighted. Then press the CURSOR RING LEFT or
RIGHT to enter Navigate mode.
Press the CURSOR RING LEFT, RIGHT, UP, or
DOWN to move to a cross hair that has a color outline.
Then press the STATUS/EXIT button to enter adjust mode.
Press the CURSOR RING LEFI, RIGH"I, UP, or
DOWN to adjust the cross hair image until the color
outline is gone. Then press the STATUS/EXIT button to
return to NAVIGATE mode. Repeat steps 3 and 4 until all
misaligned cross images have been adjusted.
After making your adjustments, you must store them in
the TV's memory using SAVE MULTIPOINT.
NOTE: If you are not salisfied with the adjustments you
just made and want to start over, you can use lhe UNDO
MULTIPOINT control, This control allows you to undo the
adjuslments, but it will work only if you use it before sav-
ing,
To save your multipoint adjustments, press the
MENU/SELECT button. This returns you to the MANU-
AL CONVERGE menu. Press the CURSOR RING DOWN
until SAVE MULTIPOINT is highlighted. Then press the
CURSOR RING LEFT or RIGHT to store your adjust-
merits in the TV's memory.
OR
To undo the multipoint adjustments you just made,
press the MENU/SELECT button. This returns you to
the MANUAL CONVERGE menu. Press the CURSOR
RING DOWN until UNDO MULTIPOINT is highlighted.
Press the CURSOR RING LEFT or RIGHT to undo the
adjuslments. Press lhe CURSOR RING UP until MULTI-
POINT RED or MULTIPOINT BLUE is highlighted. Press
the CURSOR RING LEFT or RIGHT to enter Navigale
mode. Then Follow steps 3-5 above to make your adjust-
ments again.
OR
To restore the TV's convergence to factory settings,
press the MENU/SELECT button. This returns you to
the MANUAL CONVERGE menu. Press the CURSOR
RING DOWN until RESTORE FACTORY is highlighted.
Then press the CURSOR RING LEFT or RIGHT to restore
the TV's convergence to factory settings.
Press the STATUS/EXIT button to exit the submenu.
@
PHILIPS
HsN 7
if you should experi-
ence a power outage
before saving your mul-
tipoint-convergence set-
tings, your settings will
be lost,
++++++
_+++++
++++++
++++++
lo _ga_ Exil _ Adjust
++++++
+ +++++++
+ _++++++
+ ÷++++++
+ +++++++
lo _jus! Exil _ U_ a_
+
++++++
++++++
_+++++
++++++
+ +++++++
+ +++++++
+ _++++++
+ +++++++
1__jus! Exil _ U_ a_
+
+++++++
+++++++
_++++++
+++++++
PICTURE
MAH_AL CONVERGE
• CONVERGE RED
• CONVERGE BLUE
• _OLItBOIII BLUE
• SAVEHOLliBOill
t
v
SAVE HULVIPOOn
PICTURE
HAROALCONVERGE
• COHVERGE RED
• COHVERGE BLUE
• MULTIPOINVRED
• MRETIPOIRV BLUE
PICTURE
HAROALCONVERGE
• CONVERGE RED
• COHVERGE BLUE
• HUETIPOINV RED
• HRETIPOIRV BLUE
• IF • i
[]
UUDO HRLTIPOIUT
PICTURE
HANUALCO_VERGE
I CO°VERGEBLUE
• HULTIPOINTRE°
• HULVIPOINTBLUE
• SAVEHULVIPOINT
PICTURE
l HARUAECONVERGE
I C08VERGEBLUE
• HULTIPOIUTRED
• HULTIPOIUV BEUE
• SAVE HRLTIPOIUT
i
[]
RESTORE FACTORY
PICTURE
MAEOALCONVERGE
t HOtTIVOl_I RED
• HOLTIBOIEVBLUE
• SAVEMULViVOINV
• _NDO MULViBOiNV
PICTURE
HAUUAECONVERGE
| HULTIPOIUTBED
• HULVIPOIUT BLOE
• SAVE HULTIPOIUT
• RUDO HRLTIPOIUT