Philips 51PW9363 Directions For Use Manual page 58

Appendix B
Preduct Type
Rear-projectionHD'rV Monitor
Television System
NTSC standard
Channel Coverage
VH F: 2-13
UHF: 14-69
Cable TV: Midband
Superband
Hyperband
Ul=raband
Ambient Operating Temperature
+41 =e 113°F (÷5 =e +45°C)
Mains Voltage
AC 110 ±10%
Power Consumption
180W (average)
Standby Power
<IW
Audio
Freguencyresponse:20Hz-1SkHz, ÷1/-3dB (ampl.)
Stereo outpu_ with 2 x 10W RMS
Two,4 x 6" speal_rs
Vldeo/Audlo Terminals
INPUT-AM 1
VIDEO (composite): 1 Vp-p,75 ohms
AUDIO: 500 mVrms, 30 kohm
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
('J'he Pb INPUT lack can also receive signals from outputs
labeled Cb or B-Y. The Pr INPUT lack can also receive sig-
nals from outputs labeled Cr or R-Y.)
S-VIDEO INPUT (INPUT-AM 1, INPUT-AM2, side panel)
Y-INPUT: 1 Vp-p (includes sync), 75 ohms
C-INPUT: 300 roMp-p, 75 ohms
IN PUT-AM 2
VIDEO (composite): I Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 l_hm
HD INPUT-AV 4
ComponentVideoYPrPb/RGB (See pzge 57)
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AM 5
Digital Video Interface (DVI) (See page 57)
AUDIO: 500 mVrms, 30 kohm
VIDEO/AUDIO OUTPUT
VIDEO: I Vpp, 75 ohms
AUDIO: Fixed:500 mVrms into >10 kohm
Variable: 0-2 Vrms into > 10 k_hm
Side Panel (AM3)
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HEADPHONE: 1.5 Vrms, 16 ohm
Picture Visible Area
51 PW9363: 51"
55PW9363: 55"
60PW9363: 60"
Product Dimensions (VV" x H" x O')
51PW9363:49 x 55.1 x 24.3
55PW9363:52.6 x 57 x 25.5
60PW9363:56.7 x 59.4 x 27
Product Weight (Ibs)
51PW9363:184
55PW9363:190
60PW9363:210
Supplied Accessories
Remote control with two size "AA" bakeries.
Design end speci_cetions ate subject to change w_thout notice,
58