Philips 36RF82S Directions For Use Manual page 7

_d
e YVIv audioA,ideo input jacks areJbr NOTE: Repeatedly pressing the SOURCE butlon on the remote control will toggle
irectpicture and sound connections the picture source from the current channel, the AV 1 channel, then the CVI channel,
between the TV and a VCR (or similar device) then the AV 2 channel, then the AV 3 (side) channel, then the Tuner A channel and
that has audio/video output jacks, fbllow the
ea._y steps below to connect your accessory
device to the A V ! Input Jacb located on the
back of the TE
Connect the VIDEO (yellow) cable to
the VIDEO AV l in jack on the back of
the TVI
Connect the AUDIO (red and white)
cables to the AUDIO (lefl and right)
AV 1 in jacks on the rear of the TV.
Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
Connect the AUDIO (red and white)
cables to the AUDIO (lefl and right)
OUT jacks on the rear of the VCR,
Turn the VCR (accessory device) and
the TV ON.
Press the SOURCE button on the
remote control to select the AV 1 chan-
nel, AV 1 will appear in the upper left
corner on the TV screen.
With the VCR (or accessory device)
ON and a prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY button
to view the tape on the television.
Repeatedly pressing the SOURCE button on
the remote control will toggle the picture
source from the current channel, then AV 1,
CVI, AV 2, AV 3 (Side), Tuner A channel
and the Tuner B Channel Input connections.
the Tuner B channel,
AV 1
m_m Num mmz
w E elell I
0 0 0 c_)
® ® ®
® ® ®
ID
0 0 @J
BACK OF TV
AUDIO IN
(REDeWHITE}
BACK OF VCR
@
R k
l'll DIO OUT
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS}
S-VIDEO
VIDEOIN
(YELLOW)
VIDEO
OUT