Philips 36RF82S Directions For Use Manual page 22

_o'yOu have connected the TV's AUDIO
UTP UTjacks to the AUDIO INPUT jacks
on a stereo receiver (seepage 12.fbr connec-
tion instruction.s), set AUDIO OUT to either
VARlABLE or fTXED to determine whether
you adjust the volume at the stereo or at the
TE [[you select VARIABLE, change the vol-
ume at the TV using the TV:_ remote control.
if you select FIXED, adjust the volume at the
stereo using the stereo k controls. To select
FIXED or VARIABLE,/bllow these steps.
Press the MENU button on the remote control to show the onscreen
menu,
Press the CURSOR DOWN once to
highlight SOUND,
Press the CURSOR RIGHT and the
menu will shift to the left. TREBLE
will be highlighted and an adjustment
bar will be shown to the right.
Press the CURSOR DOWN repeated-
ly until AUDIO OUT is highlighted,
Press the CURSOR RIGHT or LEFT to select FIXED or VARIABLE.
Press the STATUS/EXIT button to remox e the menu from the screen.
]illlllllll}l'-
- ,: ,m
FIXED If FIXED is selected, the sound
coming from the TV and being heard
through an external audio system is not
adjustable with the television's volume
controls. The volume would have to be
adjusted at the audio system,
VARIABLE if VARIABLE is selected,
the sound coming from the TV and being
heard through an external audio system can
be adjusted at the TV using the Volume +
or buttons on the television or remote
control.
Remember, the connection instructions for
an external audio system is Located on page
12.
• FEATURES BAlaNCE
• INSTALL AVL
INCR.SURROUND
_c
® ® ®
SOUND •
m R
• BASS
• BALANCE
• AVL
NCR. SURROUND
SOUND
INCR. SURROUND
• HEADPHONE
• STEREO
• SAP
OR
SOUND
t
INCR. SURROUND
• HEADPHONE
• STEREO
• SAP
22