Philips 36RF82S Directions For Use Manual page 55

Tte picture (o1"signal) [br the PIP window
an comej?om the ANT/CABLE (75_)
input or the external audio/video input jacks
located on the back of the TV. Selecting a PIP
channel or source simply tells the TV what to
display in tlle PIP window:
7he signal.iiz)m an external accessol%" devices
can be used to generate a PIP picture. VCRs,
DVD playerx, or similar devices can be used to
create the signal using the RF inputs, the AVl,
AV2, CVI, S-Video or AV3 blput Jacks. lhe
PIP window can also display normal broadcast
channels that have been autoprogrammed into
the television ;_memoir:
Turn the TV and the external acces-
sory device (if using one) ON.
Press the PIP button on the remote
control, The PIP window will appear in
one of the four corners of the screen,
3
Press the PIP SOURCE button to
select any of the Input Jacks or press
the PIP CH UP or DN buttons to
scroll all the available channels coming
from the ANTENNA B 75 _ input.
When using these buttons, the channel
changes will occur in the PIP window,
not the main screen,
NOTE: The normal Channel + and buttons
will not change channels in the PIP window,
They are for use with the main screen picture
only,
w
The PIP picture can also be selected by tun-
ing a channel or source on the main TV pic-
ture and then swapping the main picture
with the PIP window picture. (i,e.; Tune the
AVI channel on the main TV picture using
the AV button, then swap it into the PIP
window using the PIP SWAP button,) Refer
to the next page to learn how to use the PIP
SWAP button,
12
TUNER-A
PIP:4
STEREO
12 STEREO
TUNER-A
PIP:8
12 STEREO
TUNER-A
PIP:12
12 STEREO
TUNER-A
PIP:AV1
55