Philips 36RF82S Directions For Use Manual page 50

F_rellOw these simple steps to have your TV
mote search./or the code it needs to work
the /imctions of your accessol T device, Please
read through the steps once b_fbre pe@nwTing
them.
NOTE: 771e Search method works only with
devices equipped with channel display indica-
tor.s"or channel di.splay capability:
1
Press the POWER button on the
device your are attempting to program
io turn it ON. Slide the TV/VCR!ACC
Swich to the proper position (depend-
ing on the lype of accessory device you
have),
Press the CC/REC. button and the
SOUND button SIMUUrANEOUS-
LY and hold them down. Besure that
the remote is pointing at the accessory
device,The device will begin to change
channels after the remote identifies the
correct code.
When the channels start to change,
release the CC/REC* button and
SOUND button.
4
Don't let the device scan up more
than five channels. If you do, the
remote control may pass up the correct
code, and another two-minute search
cycle will have io be done.
If no channel change happens within two
minules, repeat steps 1_1, Should a channel
change slill not occur, the remote will not
work the desired device,
J,rw
Don't let the device scan up more than five
channels. If you do, the remote may pass up
the right code, and another search cycle will
have to be done.
if no channel change happens within several
minutes, repeat steps 1 4. Should a channel
change still not occur, the remole control
will not work the desired device.
it is recommended that you use Philips
brand external accessory devices with your
Philips television Io insure proper remote
control functions, if you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices.
Satellite Receiver
Cable Converter
5O