Philips 36RF82S Directions For Use Manual page 48

our remote control is capable of working
,our TV and many other devices that
re.spond to #_/?ared remote control commands,
such as VCRs, cable boxes, satellite systems,
and DBS. Your remote may be alread); as is, to
work an accessory device, or you may need to
use one of the methods ("Code Entry" or
"Search ") explained on pages 49 and 50.
First, try this simple test to see !/_vour TV
remote control will give you direct access to
the accessory device ivjhnctions, or i/you will
need to tl_" another method in order to set up
your TV remote control /br that capability,
Slide the TV/VCR/ACC Switch to
the proper position on the remote
control,
Point the remote control at the remote
sensor window of the accessory device
and press the POWER button,
Does the remote control turn the device ON?
If YES, stop and try other function buttons on
the remote. If they also work the device, then
the remote is ready and no further steps are
needed.
If NO, go to the next page to try the Code-
Entry method.
it is recommended that you use Philips
brand external accessory devices with your
Philips television _o insure proper remote
control functions, if you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices,
SLEEP
VCR
I
Satellite Receiver
VCR
PIP
WNCR ON/OFF POSIIlON FREEZE
SWAP SOURCE PIP CH I
® ® ®
SOUND PICTURE
@
® ® ®
INCKSLIqlL p'A_O LINT _NB_
o o o
48