Philips 36RF82S Directions For Use Manual page 49

FOdllOW these simple steps to enter a three-
igit Accessory" Device Code Number that
will allow you to use your TV remote to work
the./imctions o!'an accessory device. Please
read through the steps once bejore per/brm-
ing them.
1
Look up a three-digit Accessory
Device Code Number for the accesso-
ry device (found on pages 51-52)
whose functions you want to work with
your TV's remote control. Slide the
TV/VCR/ACC Switch to the proper
position (depending on your type of
accessory device).
Press the CC/REC. button and the
SOUND button simultaneously for a
count of two, then release both but-
tons.
Within 30 seconds enter the three-
digit code number for your accessory
dexice (refer to page 51-52 for code
List).
Point the remote at the remote sensor
window of the device. Then press the
POWER button on the remote to turn
the unit ON.
NOTE: If the process just explained doesn't
work the first time, repeat the same Accessory
De_ice code number.
if after a second try the TV remote control
does not operate your accessory device, see if
other three-digit Accessory Device Code
Numbers are shown for your device on the
list pages 51-51 and repeat the steps above
using a new number,
if after repeated attempts this method does
not work for you, go to the next page and fol-
low the steps for using the Search method to
set up your remote control,
w
it is recommended that you use Philips
brand external accessory devices with your
Philips television to insure proper remote
control functions, if you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices,
057
891
944
49
VCR
I I
Satellite Receiver
I I
® ®
J
J