Hookups - Philips DVD623 Owner's Manual

14 Hookups (cont'd)
Connecting to a TV and a Stereo Receiver
(Receiver has Dolby Digital
TM
or MPEG2)
Stereo R_eiver
{exampEe onF/)
r®L
AUDIO
Connect either the COAXIAL or OPTICAL jack of the
DVD Player to the corresponding DIGITAL AUDIO IN jack
on your Stereo. You only need one connection. Use an appropri-
ate digital audio cable (not supplied). See your electronics retailer
for details and availability.
Connect the supplied video cable to the yellow VIDEO (VIDEO OUT) jack of the DVD Player and to the TV's
VIDEO IN jack.
Plug the power cords of the DVD Player, Stereo, and the TV into an active power outlet. Press the POWER ON/OFF
button on the front of the DVD Player to turn on the DVD
Player.
Turn on the Stereo power and set your Stereo to the cor-
rect Audio In channel or sound source. Refer to the Stereo
owner's manual for details.
Turn on the TV power. Set the TV to the correct Video In
channel. See your TV owner's manual for details. Or, change chan-
nels at the TV until you see the DVD screen saver on the TV.
• Set SPDIF OUT accordingly.
Details are on page 38.
• Your Stereo must support
MPEG2 or Dolby Digital
TM.
Check the Stereo's manual
• If you prefer or need to use the
S-VIDEO or Y CB CRjacks
instead, see pages I 1-12.
• A small, square, black cap pro-
tects the OPTICALjack when it
is not in use. Remove the cap if
you want to use the jack;
replace the cap when the jack
is not in use.