Philips DVD623 Owner's Manual page 10

I0 Hookups (cont'd)
Connecting to a TV Only
TV has a yellow CVBS Video In jack
Back of T_/
(exampEe onEy)
L
AUmO
2
3
4
Connect the yellow VIDEO (VIDEO OUT) jack of the DVD
Player to the corresponding VIDEO IN jack on your TV. Use
the supplied videocable.
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the TV. Match the cable
colors to the jack colors.
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
Turn on the TV power. Set the TV to the correct Video In
channel. See your TV owner's manual for details. Or, change chan-
nels at the TV until you see the DVD screen saver on the TV.
On the TV, the Video In jack is
usually yellow and might be
labeled video, CVBS, composite,
or baseband.
If your TV has a single Audio In
jack instead of separate left/right
Audio In jacks, you will need a
different audio cable. You need a
"splitter" audio cable to go from
the left/right AUDIO OUT jacks
of the DVD Player to the single
Audio In jack on your TV. See
your electronics retailer for
details.