Table of Contents
Advertisement
I0 Hookups (cont'd)
°t'II°t°°I°e°°tetite°i°6ii°6°lj_tgq°°Q°e°eQi_°°°_i°6oIIIOOQog_Oee_iii_e_ee_tO6aiIIoot66oQ_'_tmto
° 6.o.
° •
Connectin_g to a TV and a Stereo
• Set DOLBY DIGITAL and DTS to OFF on the DVD PlayerDetails are on/)ages 38-39. Ifyou playa DVD
when the secrJngs a re wrong, the sound will be distorted or you may damagethe speakers.
Back of TV
I
I
1
j
Back of Stereo
(example
only)
Connect the red and white audio cables to the red and white AUDIO OUT
jacks on the DVD Player and to the red and white AUDIO IN jacks on the
Stereo, matching the cable colors to the jack colors,
2
Connect the supplied video cable (yellow) to theVIDEO
OUT jack on the
DVD Player and to theVIDEO
IN jack on theTV.
(Or, you may connect an optionalS-Video cable to the S-VIDEO OUT jack on the
DVD Playerand to the S-VIDEO IN jack on the'i_..)
3
Plug in the Stereo's
power cord.Turn
on the Stereo and select the Stereo_
Auxiliary
IN station.
During Disc playback,you will adjust the volume at your
Stereo. See your Stereo owner's manual for details.
4
Plug in theTV's power cord,Turn on theTV and set it to theVideo In chan-
nel (or S-Video In channel), which usually is located near channel 00. During
Audio CD playback, you may checkthe statusof Audio CDs on yourTV screen.During
DVD playback,you will watch the programon theT_. Seeyour-IV owner'smanualfor
details.
5
Connect
the DVD Player's power cord to a power outlet.
Press the POWER
button to turn on the DVD Player. "HELLO"
will appear
briefly on the DVD Player's display panel.You should see the DVD logo on theTV
screen. If you do not. check your connections and make sure the TV is on the correct
channel.
Advertisement
Table of Contents
