Magnavox SV2000 SVD101 Owner's Manual page 11

Hookups (cont'd) II
oQoo to,o • leo,i _D_Qll O,6a119QQO ,060at IOeO_ tO°J IOeel. OOQOOI • OOO0_ • _6_0,0 ,,°tOI • _06tO0 Or061 ,,Qt _lt_l • • 6trOD • • • lOrD
Connectin_ to a Dolbv Diuital Decoder or DTS Decoder
SomeDiscs are recorded in a 5.1 channelDolby Digital Surround or DigitalTheater System (DTS) Surround
format.These Discs will sound bestif you connectthe DVD Playerto a Dolby Digital or DTS Decoder.
• You will needa coaxialdigitalaudio cable(not supplied).
• If you connectthe DVD Playerto a Dolby Digital Decoder,set DOLBY DIGITAL to ON. Detailsere onpages
38-39.
• If you connectthe DVD Playerto a DTS Decoder, set DTS to ON. Detailsare on pages38-39.
If the DVD Playeris not connectedto a Dolby Digital or DTS decoder, s et DOLBY DIGITAL and DTS to
OFE Incorrectsettings may cause noise distortion and damage the speakers.
• Selectthe 5.1 channelDolby Digital Surround soundin the Disc menu.
• Connect a subwoofer andthe center,front,and surroundspeakersto the Decoder as describedin the
Decoder's owner's manual.
DVD Player
Back of TV
2 I
(example onJy)
I
© o
I
Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player
and to the COAXIAL DIGITALAUDIO IN jack on the Decoder.
2
Connect the supplied video cable (yellow) to theVIOEO OUT jack on the DVD
Player and to theVlDEO IN jack on theTV. (Or, you may connect an optional S-
Video cable to the S-VIDEO OUT jack on the DVD Playerand to the S-VIDEO IN jack on
the "1_.)
3
Plug in the Decoder's power cord.Turn on the Decoder and select the Auxiliary
IN station. During Disc playback, you will adjustthe volumeat the Decoder. Seeyour
Decoder owner'smanualfor details.
4
Plug in thel"V power cord.Turn on theTV and set it to theVideo In channel
(or S-Video In channel), which may be located near channel 00. DuringAudio CD
playback, you may checkthe Disc status on yourTV screen.During DVD playback, you will
watch the program on the'r_. See your'rV owner's manualfor details.
5
Connect the DVD Player's power cord to a power outlet. Press the POWER
button to turn on the DVD Player. "HELLO" will appearbrieflyon the DVD Player's
display panel.You shouldsee the DVD logo on the T_ If you do not, checkyour connec-
tions and make sure theTV ison the correct channel.