Magnavox SV2000 SVD101 Owner's Manual page 9

Hookups (cont'd) 9
too ,o,oo • ,60 toQo ,,61 • o,tl ,ooo ,,,ig ,,,o,, o,ooll oeeo.loeo* Qleeol po,o_oo,,oogg ,,6oeeooto,ee,i, • • ,,tQol_l • ,o,o,tf_Q
Connectine the DVD Player to a "IV on_ (no stereo or amplifier)
TV has audio (red and white) and S-Video In jacks
• For better picture quality, u sean optionalS-Videocable to connectthe S-VIDEO OUT jackon the DVD
Playerto the S-VIDEO IN jack on your T_.You will not use theVIDEO OUT jack on the DVD Player, a nd you
will not need the yellow video cable.
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player. D etailsare on pages38-39. If you playa DVD
when the settings are wrong, the sound will be distorted or you may damagethe speakers.
Q S-VIDEOIN
(_ LEFTAUDIOIN
0 R;GHTAUDIO IN
Back of'IV
(example only)
DVD Player
H
_T oJr _
I
Connect the red and white audio cables to the red and whiteAUDIO
OUT jacks on the DVD Player and to the red and white AUDIO IN jacks
on theTV, matching the cable colors to the jack colors.
2
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on
the DVD Player and to the S-VIDEO IN jack on theTV.
3
Connect theTV's power cord to a power outlet.
Turn on theTV and set it to the S-VIDEO IN channel.This channel usually is
located near channel 00. See your'IV owner's manual for details.
4
Connect the DVD Player's power cord to a power outlet.
Press the POWER button to turn on the DVD Player. "HELLO" will appear
briefly on the DVD Player's displaypanel.You shouldsee the DVD logo on the'IV
screen. If you do not, check your connections and make sure the "IV is on the cor-
rect Audio/Video In channel.