Connect The Ac Power Cord; Manage Cables; Switch On Thetv - Magnavox 19MF338B User Manual

4.S
Connect theAC power cord
WARNING:
Verify that your voltage corresponds with
the voltage printed at the back of the TV.
Do not insert theAC power cord if the
voltage is different.
To connect the AC power cord
/
2.
3.
Locate the power connector at the back of the
TV. The location of the power connector varies
according to TV model.
Insert the AC power cord fully into the TV
power connector.
Connect the AC power cord plug to the power
outlet. Ensuring that the cord is tightly secured
at both ends.
4.6 Manage cables
Route your AC power cord, antenna cable and all
other device cables through the cable holder at the
back of the TV.The holder helps keep your cables
tidy and easily manageable.
4.7 Switch on theTV
Before you switch on the TVI check that the mains
cord is properly connected. Press POWER
button at the front side of the TVI or press power
the remote control. The TV normally takes 10-15
seconds to start up and the following screen appears
the first time you turn on the TV.
Follow the on-screen instructions to select your
language and complete your TV setup, installation
takes approximately 10 minutes.
Note: If you connect yourTV to a cable receiver
box or satellite set-top box, you do not need
to install channels. Press the red button on the
remote control to exit the channel installation
stage of the setup.
.......... _
EN-IO