Install The Remote Control Batteries; Connect The Antenna Or Cable - Magnavox 19MF338B User Manual

3. Firmly pull the stand from the bottom o ftheTV.
Place both t he stand and b olts inasecure
location for f uture r einstallation.
Step 3 Connect cables
Connect the antenna cable,AC power cord and all
other devices to the back of the TV as described in
the following sections and in Section 7 Connect devices.
4.3 Install the remote control batteries
1.
2.
Open the battery cover on the back of the
remote control.
Insert the 2 batteries supplied. Make sure the
+ and - ends of the batteries line up correctly.
(inside of case is marked).
Close the cove£
Step 4 Secure theVESA-compatibaewall
bracket to the TV
WARNING
Only use the specified bolts (M4) to secure
theVESA-compatible wall bracket to your
TV. The specified bolts are designed to
match the weight of yourTV.
Note
Depending on your VESA-compatible wall
bracket, you may need to separate the mounting
plate from the wall bracket for easier installation.
Refer to yourVESA-compatible wall bracket
documentation for instructions.
Q
i i
® 4D
100x100 mm
_J
4.4 Connect the antenna or cable
This section describes how to connect yourTV to an
antenna, cable, Direct Broadcast Satellite, and to a
cable receiver box.
_ CABLE
J
Connect to an antenna
Any DTV programs that are broadcast in your
area can be received for free through an antenna
connection.
Contact your local content provider or your local
electronics retailer if you are unsure about what
HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital
TV. This means that a given broadcaster can have
channels available either in analog or in digital, or
both analog and digital at the same time.
The TV has stereo sound if the broadcasting channel
makes it available.
EN-8