Magnavox TP3675 User Manual page 9

• Location of Controls
A POWER
Press _ On.
Press again _ Off.
B VOLUME UP/DOWN
I
(+) Increases sound.
( ) Decreases sound. I
C SENSOR AREA FOR REMOTE CONTROL A I
I
D CHANNEL UP/DOWN
(A) Selects next higher channel.
(Y) Selects next lower channel.
• Press both al same time to access MAiN MENU Screen.
E VIDEO/AUDIO[_ TERMINALS
(VIDEO/AUDIO terminals are also provided on the rear.)
B D
VOLUME UP/DOWN _ III M_.u
(+) k_creases sound. / i 9 "_
[-) Decreases sound.
/ If
'nmen°m°de, changes°rs°'ec's/ / i l
the TV adjustments.
MENU _ _ &
Press _ Accesses MAiN MENU. / _ _ [_j v_.
Press again _ Exits MAIN MENU. _p
TV CATV MODE SELECT SWITCH
In TV position, sends power and II
channel select commands (Channel _ _='_
up/down and Random Access buttons) I_HILID_ I
to the TV.
In CATV position, sends power and
channel select commands to a cable
TV converter.
VCR CONTROL
See page 36.
NOTE:
Infrared Transmitler Window
INPUT STATUS
Press _ Displays receiving channe{ for
four seconds.
Press again _ Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press once _ Switch to external video
INPUT f mode.
Press again _ Switch to exlemal video
INPUT 2 mode.
Press again _ Switch back to the
original TV mode.
See page 34.
ENTER
The "100 _' bulton functions as an
"ENTER" button when in the VCR
mode. (See page 36)
CHANNEL UP/DOWN
(A) Selects next higher channel.
(Y) Selects next lower channel.
• See pages 27 - 29 for channel
presetting.
• oves the" @ " mark of the MENU
screens.
MUTE
Press _ Mutes sound.
Press again _ Restores sound.
• CLOSED CAPTION appears when
sound is muted.
SMART WINDOW _=PIP FUNCTION
With the VIDEO inputs, you can watch
two pictures at lhe same time. See
pages 32 - 33.
• The above shaded buttons on the Remote Control glow in the dark. To use the glowdn-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination wili vary depending on the strength of lighting used.
• The degree of illumination wili decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
9