Table of Contents
Advertisement
•
Universal
Remote Control
With the purchase of your television
set you
also have received the latest innovation
in
remote control technology.
With its easy-to-
use push-button
keypad, your Remote can
control your television set and most infrared
remote-controlled
VCRs
and cable
TV
converters as well.
NOTE:
• Depending
on the model,
year produced,
brand and type of VCR, some models may
not be compatible with the remote control.
• Some brands of VCR or Cable TV converter
Box may not enable channel
selection
until
"100" (ENTER) button is pressed.
Example:
When you select channel 24,
(1) Press REMOTE KEYPAD "2".
(2) Press REMOTE KEYPAD "4".
(3) Press "100" button.
For detailed information on the use of the VCR
or Cable
TV converter
Box refer to their
operating manuals.
•
Using Your Remote With Your TV
After installing the batteries, set the TV-CATV
on the remote to the TV position. (If you can
change the channel
of the TV by pressing
CH UP (_,) or DOWN (Y) on the Remote
Control, it is in the TV position.)
"Identifying"
Remote VCR and Cable TV
Converters
Your Remote
Control
has been set at the
factory to operate your TV and many remote
control VCRs and Cable Converters. However,
in some cases an easy one-time set-up step
may be necessary
before the Remote will
operate
accessory
VCRs
and
Cable
Converters.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR or Cable Converter.
• Once "identified", the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due
to a battery failure.
Using Your Remote Control With a VCR
Once you make certain the Remote Control
has "identified" your remote controlled
VCR,
the Remote Control is ready to operate your
unit. The various VCR function buttons on the
Remote Control
will not operate your VCR
if those features
are not already
found on
your unit.
• All VCR buttons
will operate
whether
the
Remote Control is in TV or CATV modes.
• For detailed information on the use of the VCR,
refer to the operation manual of the VCR.
VCR POWER
Press to turn the VCR on
and off.
PLAY •
Press to playback a tape.
REWIND
,4,4
Press to rewind
a tape.
For some VCRs you may
need to press STOP first,
then REWIND.
In Playback
mode,
ho_d
button down to view picture
moving rapidly
in reverse.
PAUSE
II
Press to temporarily
stop
the tape during playback
or recording.
Press PLAY
to release
Pause.
STOP •
Press to stop the tape.
REMOTE
KEYPAD
Use to enter two-digit
code
numbers
when identifying
your
VCR.
FF ••
Press to rapidly
advance
the
tape. For some VCRs, you may
need to press STOP first, then
FF.
In Playback
mode,
hold button
down to view the picture moving
rapidly in forward
direction.
VCR CHANNEL
UP (A)/DOWN
(V)
/
Press to scan up or down through
channels
on the VCR.
RECORD •
Pressto begin recording.
PIP BUTTONS
See pages 32 - 33.
36
Advertisement
Table of Contents
