Table of Contents
Advertisement
• It is the intent of Philips that this product be used in full compliance
with the copyright law and that
prior permission be obtained from copyright owners whenever necessary.
• For detailed information
on the connection and use of auxiliary equipment,
refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
These jacks are used for connecting a standard stereo amplifier. Control of STEREO/MONO/
SAP, VOLUME
and MUTE are retained at the TV. These jacks relay the audio signal of all
programs being displayed on the TV screen.
(AUDIO OUTPUT JACKS are located
on the rear of the cabinet.)
:lear connectionterminalsof "IV
o
DDD©!
To the audio
[Stereo Amplifier]
inputterminals
[Speaker System I
(1) Before connecting the cord, turn on the TV and adjust the VOLUME control on the TV for a moderate
listening level.
(2) Turn off the TV and connect the audio cord to the AUDIO LINE OUTPUT JACKS on the TV.
(3) Turn the TV set and stereo amplifier on.
(4) If you desire, you can turn off the sound to the TV's internal speakers by SPEAKER
mode. See
pages 13 - 14.
(5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level.
(6) Control of the audio can be done using the audio controls (STEREO/MONO/SAP,
VOLUME, and
MUTE), from either the remote control, or directly from the TV set.
NOTE:
• For detailed information on the connection
and use of auxiliary equipment,
refer to the operation
manuals of the equipment being used.
• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio
connection cord and plug adapter as shown below.
• For optimal sound quality, it is recommended
to keep the TV's audio output ievel high.
Plug adapter
__
z
_
To the equipment
To the TV _
____
being connected
Pin plug x 2
Pin plug
Pin jack/Mini plug
35
Advertisement
Table of Contents
