Table of Contents
Advertisement
anging
FrontPanels
Your new KitchenAide dishwasher comes with a reversible front panel. You may choose
from black or white (front and back of panel) or build a custom panel. See "Optional front
panels" on page 23 if you want to use custom front panels.
IN THIS SECTION
Page
Changing the front panels ............... 21
L
Page
Optional front panels ....................... 23
Changing the front panels
Personal Injury Hazard
Wear gloves and handle panels carefully.
Failure to do so can result in cuts to hands
or other parts of your body.
If you want to change the color of the panels,
follow one of the options below:
OPTION A
Use these directions when dishwasher
front protrudes several inches from the
cabinets.
Upper Panel:
1. Disconnect electrical power supply.
2. On each side of the door, remove the
three screws (A) from the side trim (B),
then remove the trim.
e
Use both hands to bow the right and left
sides of the color panel. Be careful not to
scratch or bend the color panel. Pull the
color panel down from behind the control
panel, then lift color panel out of bottom
trim.
4. Turn the panel to the desired color. Slide
the top of the color panel behind the
control panel. Bow the right and left sides
of the color panel and slide the bottom of
the color panel behind the bottom trim.
5. Replace side trim (B) and three screws
(A) on each side of the dishwasher door.
Electrical Shock Hazard
Disconnect electrical
power supply to dish-
washer before changing
panels.
Failure to do so can result
in death by electric shock.
Remove
screws and
trim pieces.
B
A
/
C
j
.
D
Bow color panel out.
21
Advertisement
Table of Contents
