Starting Your Dryer - KitchenAid KGHS02RWH0 Use & Care Manual

DRYER USE
CONTROL Ol_ 0
Sensing O
Wet O
Damp O
Cool Down O
Cycle Complete O
Extra Care O
Control Locked O
AUTOMATIC
Heavy Duty
Norma_
Casua_
Dekate
Super
Delicate _
MANUAL
Timed Dry
Estimated T_me
IO High
Remain ng
Medium
Touch_p O |IoOM°re f Low Loud Oil @
i O Oo trak°w O
, Sof_ O
RaDd Dry _ Less Air Only Off
O
_ANUAL_ DRYNE_g TENP _XT_A CYCLq
D_Y
T_M_
L_V_L CARE END _ _
SIGNAL
W_is_ _iet Hold for 3
seconds to
lock / unk_ck Pause
con _o/
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Fire Hazard
No washer can completely remove oil
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
[terns containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
The following is a guide to starting your dryer. Please refer to
specific sections of this manual for more detailed information.
f. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry into dryer and shut door.
3. Rotate the dial to select either an Automatic or Manual Cycle
then press the CONTROL ON button. The preset settings and
drying time for the cycle chosen will be displayed.
To use an Automatic Cycle
Point the dial to an Automatic Cycle.
Select DRYNESS LEVEL to adjust how dry you want the
load to be. The time displayed is an estimated length of
the cycle based on the Dryness Level selected. As the
cycle runs, the control senses the dryness of the load and
adjusts the time automatically for the selected Dryness
Level.
I More
Less
NOTE: Time is not adjustable for Automatic Cycles. Pressing
the Manual Dry Time (- or +) buttons will cause a triple beep,
indicating that the time cannot be changed.
• Press the EXTRA CARE feature button if this option is
desi red.
• Press the CYCLE END SIGNAL button to set signal
volume to desired level.
• Press (and hold) HOLD TO START button until dryer starts
(about 1 second).
Once an Automatic Cycle has started, the Extra Care feature
and the Cycle End Signal level can be adjusted. Press the
OFF key twice to stop the dryer and clear the settings,
allowing you to select another cycle and Dryness Level.
O
D_YNEgS
L_VEL
15