Starting Your Dryer - KitchenAid KGHS02RWH1 Use & Care Manual

DRYER USE
CONTROL ON O
Sensing 0
Wet 0
Damp 0
Cool Down 0
Cycle Complete 0
Extra Care 0
Cont*ol Locked 0
AUTOMATIC
Heavy Duty
Normal
Casua_
Delicate
_CYCLI_S_._
MANUAL Estimated Time ¢O High
Timed Dry Remaln_ng p Medium
o
o o o o
ANU DRYNESS TEMP EXTRA CYCLE
DRY TIME LEVEL CARE EI_NDL_..,,
C@
lock / u_+lock Pause
controJ
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
The following is a guide to starting your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry into dryer and shut door.
3. Rotate the dial to select either an Automatic or Manual Cycle
then press the CONTROL ON button. The preset settings and
drying time for the cycle chosen will be displayed.
To use an Automatic Cycle
Point the dial to an Automatic Cycle.
Select DRYNESS LEVEL to adjust how dry you want the
load to be. The time displayed is an estimated length of
the cycle based on the Dryness Level selected. As the
cycle runs, the control senses the dryness of the load and
adjusts the time automatically for the selected Dryness
Level.
I ore
Less
NOTE: Time is not adjustable for Automatic Cycles. Pressing
the Manual Dry Time (- or +) buttons will cause a triple beep,
indicating that the time cannot be changed.
• Press the EXTRA CARE feature button if this option is
desi red.
• Press the CYCLE END SIGNAL button to set signal
volume to desired level.
• Press (and hold) HOLD TO START button until dryer starts
(about 1 second).
Once an Automatic Cycle has started, the Extra Care feature
and the Cycle End Signal level can be adjusted. Press the
OFF key twice to stop the dryer and clear the settings,
allowing you to select another cycle and Dryness Level.
O
DRYNESS
LEVEL
15