KitchenAid KGHS02RWH0 Use & Care Manual page 6

Minimum installation spacing for custom undercounter
installation
The dimensions shown are for the minimum spacing allowed.
Custom undercounter installation - Dryer only
,000; F1 i
(9&52 cm._._ 1
0"* _ 27"_-- 6"*
(6cm) ' (66.6 cm) 6cm
*Additional spacing recommended
Minimum installation spacing for recessed or closet
installation, with or without a pedestal
• The dimensions shown are for the minimum spacing allowed.
• For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable.
Closet installation - Dryer only
48 in, 2
{316 cm _)
24irL_
(155cm_)
I1.1<- 31,_"_1 e"*l
(Z5cm)(66cm) (6cm)
A
A. Side view - closet or confined area
B. Closet door with vents
*Side or bottom venting - additional spacing recommended
Recessed or closet installation - Dryer on pedestal
Minimum installation spacing for cabinet installation
• The dimensions shown are for the minimum spacing allowed.
• For cabinet installation, with a door, minimum ventilation
openings in the top of the cabinet are required.
" • 7" (17.8 cm)
ra) 0'_ 31W' 1" 0 "_ 27" 0 ''_
(0era) (80.0cra) ( 23cra) (0cm)(Tg.6cm)(0cm)
•Additional spacing recommended
•*Side or bottom venting - additional spacing recommended
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48 in? *
{310 cm 2}
o
24 in? *
(155¢m_)
•Min. top and bottom air openings for closet door
3"(7.6 era)
i
3" {7=6cm) =
$ _ _1"(2=5cm)
27" -*I*-6"*
(6cm) (686cm) (6cm)
A
[_] --_ 14" rr_x,
r' II*- _lW'-_16"**1
(2,5 cm) (86ore} {6 cm}
B
A. Recessed area
B. Side view - closet or confined area
6" {!_,_2 cm)
j/
76"
-- {193 era)
.\ ./_
i
5Y_"**_ _ 1"*h _ _ 2T'_- _ l"**t
{14 cm} (2=5 cm) 68=6 cm 2=5 cm
**External exhaust elbow requires additional spacing.
**l-Wall, door and floor molding may require additional spacing.
*Additional spacing recommended
**Side or bottom venting - additional spacing recommended