Embroidery Mode - Edit; Load A Stitch - Pfaff creative vision Owner's Manual

8 Embroidery mode - edit

Load a stitch

It is possible to load previously stored patchwork,
single stitch and tapering programs into
embroidery edit to stitch-out in the hoop.
If the stitch contains tapering, the stitch
combination will be converted to an embroidery
design.
Zoom
Use the + and - icons to zoom in or out in the
embroidery eld. Touch the zoom icon (A) to open
a list of zoom options.
Zoom to box (B) lets you decide how much and
where to zoom in the embroidery area. First, select
zoom to box in the pop-up. The zoom icon starts
ashing, indicating that zoom to box is active. In
the embroidery eld on the PFAFF® HD screen,
touch and drag with your stylus to de ne the
area to be zoomed. Zoom to box will then be
deactivated.
Note: While zoom to box is active the touch functions
are disabled. To deactive zoom to box without making
any selection, touch any of the touch function icons.
How much you can zoom in depends on the selected
hoop.
Zoom to all (C) will show all the designs in the
embroidery combination in the largest view
possible.
Zoom to hoop (D) will adjust the view to show the
selected hoop.
Note: The new zoom functions are available in both
embroidery edit and embroidery stitch-out mode. The
new zoom icons are also available in Stitch Creator.
A
B
C
D