Pfaff creative vision Owner's Manual page 8

Select control points (D)
Touch the select control points icon (D) to open a
pop-up. For each shape, there are pre-de ned sets
of control points. Select all or some of the control
points.
When you have selected a set of control points, you
can make adjustments to the shape. Use the touch
functions or your stylus to move, rotate and scale
your selected control points. The adjustments made
will only affect the selected control points.
Use the slider to increase or decrease the attraction
percentage of the selected control points. The
higher the attraction percentage, the closer the
baseline will be to the selected control points.
Select spacing (E)
Touch the select spacing icon (E) to open a pop-up.
The default setting spaces the objects evenly along
the baseline (placing the same distance between
each).
You can choose left or right justi cation on the
baseline. The gap between the objects can be
increased or decreased by using the slider. The
actual gap is shown above the slider in the pop-up.
Select line positioning (F)
Touch the select shape line positioning icon (F) to
open a pop-up. You can choose to place the objects
on the top of the baseline, or on the baseline or
under the baseline. The selected positioning will
affect all objects on the shape.
D
E
F