Embroidery Mode - Stitch Out; Precise Positioning - Pfaff creative vision Owner's Manual

9 Embroidery mode - stitch out

B
Basting
Basting enables you to secure your fabric to a
stabilizer placed beneath it. It is especially useful
when the fabric to be embroidered cannot be
hooped. Basting provides support for stretchy
fabrics.
Touch the basting icon (A) to activate basting.
Long touch the icon to open a window to select to
add the basting stitch around the design area and/
or around the hoop area.
Select baste around design and the machine
will add a basting stitch around the design area,
outlining the area where the design will be placed
A
on the fabric. Select baste around hoop area to add
a basting stitch close to the inner edge of the hoop.
The baste stitches will be added as the rst separate
color block(s) at the beginning of the in the color
list (B). You can step stitch by stitch and step in and
out of the baste color block(s).
Note: Basting can only be enabled while on the rst
stitch in the embroidery.

Precise positioning

Zoom to needle (C)
Precise positioning is easy to use with the new
zoom to needle option. Touch the zoom to needle
icon (C) to pan to the current needle position and
C
zoom in as much as possible on the screen. You can
position the locking and matching point exactly
where you want them.
Disable needle warning (D)
Check allow lower needle icon (D) to temporarily
allow the needle to be in a lower position while
moving the hoop. The needle can then remain close
to the fabric when using precise positioning. Just
make sure the needle is above the fabric to prevent
damage to the needle and fabric.
Note: The warning cannot be disabled when the needle is
below the stitch plate.
D