Adjusting Seam Width - Pfaff hobbyblock 794 Instruction Manual

Adjusting seam width:
Standard setting is 3.5 mm. The seam
width can be changed from 2.5 to
6.5 mm. according to fabric type and
seam requirements.
Note:
Before adjusting the stitch width, always
disengage the upper knife.
To disengage upper knife, open looper
cover. Push upper knife holder (1) to
the far right. Turn knurled knob (2)
clockwise until it clicks.
Choose the required seam width by
turning the stitch width button (3).
Normal stitch width is "N". Reset the
upper knife to the lower (cutting)
position and close the looper cover.
Sew a test sample.
Note:
After adjusting the seam width, it may
be necessary to reset the thread
tension.
22