Setting the stitch length on 796
Open lateral swivel table 15. Press stop
of main feed dog (see arrow) fully
downwards and hold it there. Turn
handwheel 12 in the direction indicated
by the arrow until it snaps into place.
Set the required stitch length at mark A
by continuing to turn handwheel 12
forwards or backwards, as may be
required (point of arrow).
/
The numbers indicate the stitch length
di
if
in
mm which normally is N
=
3 mm.
I!
If
I
The stitch length is set firmly as soon
Ii
II
I
as you release the stop of the
main
II
I
feeddog.
19