Caring For Your Machine; Cleaning; Shuttle Cleaner - Pfaff SZA-645F Instructions Manual

CARING FOR YOUR MACHINE
CLEANING
Your machine will always work well if
you take a few moments to keep it
clean.
If lint and bits of thread ac
cumulate under needle plate, around
fabric feed and in the shuttle, this will
interfere with the operation of your
machine. Check occasionally and clean
whenever necessary.
• Before cleaning, disconnect cord
from outlet.
• Remove needle plate and slide plate.
• To remove shuttle: raise needle to
its highest position and remove
bobbin case. Turn levers away from
shuttle and lift out retaining ring
and shuttle, by grasping center pin.
• Thoroughly clean under fabric feed
with a small brush. Remove lint
and thread from all parts of shuttle
and wipe with a lightly oiled cloth.
• To reassemble: hold shuttle by
center pin and fit carefully back
into shuttle race, forming perfect
circle with driver. Replace retaining
ring, polished side out, making sure
the bottom pin fits into notch.
Lock retaining ring by turning levers
back into position. Replace bobbin
and case.
Shuttle Cleaner
This machine is fitted with a shuttle
cleaner which removes accumulated
lint and thread from the shuttle race
to help keep it clean and prevent
jamming.
If thread gets caught in shuttle by
turning hand wheel backwards or stitch
ing without fabric in the machine, the
thread will break and be swept out of
the shuttle. The machine will not jam.
If machine becomes stiff for a moment,
turn hand wheel toward you to free it.
Should the shuttle cleaner jump out
from the race, insert cleaner in space
A, with the protrusion B fitting in slot
C, forming a perfect circle with the
driver D.
told
'our
bric
g of
:ton
'hen
in
)les,
rial
for
bric
n to
iced
bric
ling
A
—
40
—