Notes On Safety - Pfaff creative 7570 Instruction Book

Notes on safety
Notes on safety for domestic sewing ma:
chines in accordance with EN 60335-2-28
and/or IEC 335-2-28
1
-
The user must exercise adequate caution
with regard to the up and down moving
needle and constantly observe the sewing
area while working.
2. When leaving the machine, during
maintenance work or when changing
mechanical parts or accessories,
always disconnect the machine from
the mains by pulling out the mains
plug.
3. The maximum permissable wattage for
the sewing lamp is
15 watts.
4. The tension of the drive belt may only be
adjusted by a Pfaff mechanic.
5. The machine is to be put into operation
according to the indications on the speci
fication plate.
6. Do not place any objects in openings on
the machine.
7. Do not use the sewing machine if:
—
there is visible damage
—
its function is disturbed
—
it is wet, e.g. with condensation.
8. Do not pull the mains plug out of the
socket by its cord.
9. No liability will be accepted for any dama
ge caused if this machine is used for any
purpose other than that for which it is
intended or if it is operated incorrectly.
1 0. To avoid the risk of electric shock, do not
open the machine. There are no parts
inside the machine which the user can
repair. This is solely the responsibility of
our qualified service staff.
11. Only original PFAFF parts may be used.
Environment
The recommended environment is:
Ambient temperature 10°C (50"F) to 40°C
(140 °F)
Air humidity 20% to 80 %.
This sewing machine is a high-quality electro
nic-mechanical appliance; it is a machine for
supervised use in the home. It should be ope
rated in such a way that it is not subjected
to: dust, severe dampness, direct sunlight,
static electricity, heat-producing objects,
corrosive chemicals or liquids.
The machine is to be used on a firm and
even surface which is open for ventilation
purposes.
Treatment
Always protect the machine against damage
which could be caused by it being hit or
dropped.
Cleaning
Housing and display:
To clean the housing use a dry, clean, soft,
lint-free cloth.
To remove any stubborn dirt, use a soft cloth
moistened with alcohol.
Please note!
Do not use any insecticides or chemical
products such as petrol or liquid chemicals
to clean the housing.
3