Pfaff expression 2026 Owner's Manual page 81

Problem/Cause
The machine does not feed or feeds irregularly
Sewing lint has collected between the feed dog teeth
rows.
Feed dog is lowered.
Slide B is at the right (see page 2:20)
The needle plate is not lying at.
The machine is running with dif culty
There are thread remnants in the hook ways.
The machine does not sew the selected stitch
Switch off the machine, wait 10 seconds and switch on again. Select the desired stitch again. Before changing presser feet
and needle the main switch must be switched off. Do not attempt to sew without fabric under the presser foot. When
leaving the machine, even for only a short time, switch off the main switch. This is important if there are any children
nearby.
Display incorrect or no display
When static electricity is being discharged some segments
of the display will fail.
Non-original Parts and Accessories
The warranty does not cover any defect or damage caused
by use of non-original accessories or parts.
Remedy
Remove needle plate, remove lint with brush.
Push slide B to the left.
Push slide B to the left.
Press downwards at the front of the needle plate until you
hear it snap into place.
Remove the threads.
Switch off the machine on completion of the sewing operation
and then turn it back on again after approx. 10 seconds. All
segments must appear again on the display. Select the desired
stitch again
Maintenance
7:5