Hqview-5Xx System Description; Product Overview; Product Specification; Power Supply Requirement - Optoma HQView-500 Series Operating Instructions Manual

Image scaler

Hide thumbs

Table Of Contents

Table of Contents

2.1.

Product Overview

HQView-5xx is designed to accept the following input signals:

 Composite video via BNC

 Composite video via RCA

 S-Video via 4-way miniDIN

 YPbPr or RGBS or RGsB SD/ED/HD component video via 3 or 4 BNC connectors

 3G-SDI/HD-SDI/SDI (Serial Digital Interface) via BNC

 VGA/SVGA analogue (computer interface) via 15HDD

 DVI (Digital Visual Interface) via DVI-I (supporting a digital and 2

 HDMI via HDMI connector

2.2.

Product Specification

This section provides technical details for all possible inputs.

Please note that not all possible input options are applicable to all output formats.

2.2.1.

Power Supply Requirement

100V-264VAC 50/60Hz connected via a standard IEC connector located on the rear panel.

2.2.2.

Video Inputs

Composite via BNC and RCA connector, S-Video via 4-way mini DIN socket

Signal formats

Standards

Composite (CVBS) input level

Luminance (Y) input level

Chrominance (C) input level

Input Impedance (all inputs)

2.2.3.

Component Video Inputs

Via 3 or 4 BNC connectors

YPbPr (YUV), YPbPrS, RGsB and RGBS component video, menu selectable.

Signal formats 484i (480i) and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz and

1080p at 23.98, 24, 25, 29.97 and 30Hz.

Please note this input does not support Computer SVGA signals which should be connected via the

Computer SVGA input, The SVGA input supports the separate H & V syncs.

2.2.4.

3G-SDI Input

Format:

Input impedance:

SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant, accepts 484i, 576i, 720, 1080i and 1080p

single link formats at 270Mb, 1.485Gb or 2.97Gb rates.

Calibre UK Limited Issue 2.30