Table of Contents
Advertisement
4.1.
Introduction
HQView-5xx features a web server which connects to a PC web browser via TCP/IP. The menu system
of HQView-5xx is mirrored into the web browser and all menu items can be accessed and controlled
through the keyboard or mouse of the PC.
4.2.
Installing the Software
No extra software needs to be installed on a PC. The PC web browser is used as the graphical user
interface for all control items. To connect to the HQView-5xx the TCP/IP address of the unit has to be
entered into the address list box of the web browser in the following format http://xxx.xxx.xxx.xxx. The
TCP/IP address assigned to HQView-5xx can be found in the System/Network Settings menu.
4.3.
Discovery Tool
Calibre provides a DiscoveryTool.exe Windows application to identify Calibre boxes in the network.
http://www.calibreuk.com/downloads/LEDView/DiscoveryTool_V1.0.exe
Clicking on the link of the recognized box will open a browser and make a connection to the
corresponding box. The box identifier is made up of "PV6S" in the case of HQView-5xx followed by the 6
least significant digits of the MAC address. The MAC address of the box can be found in the
System/Network Settings menu.
Note: This is for use on a network not on a single wire connection.
©
Calibre UK Limited Issue 2.30
REMOTE CONTROL WEB SERVER
nd
22
April 2013
31
Advertisement
Table of Contents
