Optoma PS200 Quick Start Manual

Standby
Graphic image shown above is for the fully loaded PS300T /LS300T
Refer to the table below for other configurations and their corresponding models

Configuration

Inputs: 2xHDMI 4K, 1xHDMI HD, 1xDisplayPort 4K, 1xVGA, 1xCVBS, 1xDVI
-U (DVI/HDMI & VGA/RGBS/YPbPr), 1x Streaming Video
Outputs: 1xHDMI 4K, 1xDVI/HDMI
UHD/4K 50/59.94/60p modes supported in 4:2:0 format
Inputs: 2x3G-SDI, Genlock / Outputs: 1x3G-SDI
Inputs: 1xHDBT 4K / Outputs: 1xHDBT 4K
Analogue Audio In, Out and Power Amp
Video & Audio Inputs
● 1xDisplayPort 4K ● 1xVGA
Selects built-in test
● 2xHDMI 4K ● 1xCV
patterns or stored
● 1xHDBaseT 4K ● 2x3G-SDI
images. Use jog wheel
● 1xIP Video
to scroll through
● 1xDVI/RGB YPbPr ● 1xHDMI

Genlock Input

PS200
●
●
PS200,PS200T,PS300T, LS200, LS200T, LS300T

Test Patterns

Function Shortcuts

● Blank: Sets the o/p to black
● Freeze: Freezes the output
● Logo: Displays stored LOGO
● PTZ: Selects portion of the input
image to be scaled
Press to toggle functions ON or OFF

Speaker/Line Output

Outputs
● 1xHDMI 4K ● 1xDVI/HDMI
● 1xHDBaseT 4K ● 1x3G-SDI
PS200T PS300T LS200 LS200T
● ● ●
●
●
●
● ● ●
HQView6xx/HQUltra7xx/LEDView7xx

Menu Navigation

● Menu Sel: Enter or select a menu
● Esc: Exit the menu or jump to exit item
● Display: 4-line high contrast LCD display
● Jog Wheel: Scroll through the menu,
change value or press to enter a selection
● 1x TCP/IP DHCP default, port 30000
● 1xRS232: 115200,1,8, No Parity, Off
● 2xUSB
LS300T

Front Panel Key Shortcuts


● ●
Keypad unlock: Esc + Menu/Sel

Mode reset: Esc + CV

Factory reset: Esc YPbPr

●
Set output mode to 720p: Esc + VGA

Firmware version: Standby + Esc
● ●
● ●
Quick Start Guide
Quick Start Guide
Control